Používání Floower
Takže tvoje Floower už je venku z krabice a bez ochranné pásky na lístkách a podstavci? Pokud ano, tak už ti nic nebrání ji konečně zapnout.
Get ready to power on
Once you take Floower out of the box, make sure to remove protective wrap around petals. Do not try to turn on the Floower if something is blocking the blossom.
Power ON - bring your Floower to life
- Hold your Floower upside down to see its bottom cover with the Floower logo
- Zde se na okraji nachází miniaturní ON/OFF vypínač.
- Ujisti se, že se nedotýkáš lístku na stonku.
- Use pointy thing included in the box to move the switch to ON position
- Modrá indikační kontrolka poblíž USB konektoru začne blikat.
- Otoč Floower zpět květem vzhůru.
Touch the leaf
Floower is delightful to control by touching its metal leaf, and there is a simple and long touch.
A simple touch is cycling through 3 following modes:
- Floower will bloom – blossom will open and lights up in random color
- Blossom will close and remain lit
- Light will fade away, and Floower will come to sleep
A long touch allows you to either pick a color or connect your Floower to a mobile device.
- 2-second touch will start cycling through colors, and the following short touch will confirm color selection
- 5-second touch makes your Floower flashing blue and gets it into the Blueetoth discover mode
Charge the battery
Use provided USB-C cable to charge the Floower from your mobile phone charger or any USB port. If you check the bottom side of the Floower the RED light should shine next to the USB port saying it’s charging. Once the RED light goes away the Floower is fully charged.
Maximální hodnoty pro nabíjení: 5V 1A
Connect to mobile app
When you connect your Floower to a mobile app, you do not only get a remote control, but you will also get access to some advanced options.
Jak se k Floower připojit?
- Install Floower app from Apple Store or Play Store
- Hold the leaf for 5 seconds while Floower is sleeping until it starts flashing blue
- Open the Floower app and follow the on-screen instructions
- Ovládej Floower na dálku.
Co vše lze ovládat pomocí mobilní aplikace?
- Remotely change the color or make the flower bloom
- Vytvořit si vlastní barvu.
- Upravit jméno květiny.
- Adjust the speed of petals blooming
- Adjust the light intensity
- Connect your Floower to WiFi so you can control it from anywhere
Connect to WiFi
Connecting your Floower to WiFi allows you to control it from anywhere. For WiFi connection, you need firmware version 10 or higher and the latest mobile app.
- Floower needs to be connected to a power supply in order for the WiFi module to work
- Open the mobile app with your connected Floower
- Navigate to the Settings screen
- Tap on WiFi
- Enter the name and password of the WiFi you want to connect to
- Congratulations, you can control your Floower from anywhere
Keep Your Floower Upgraded
That’s right! The Floower is upgradable. Learn how to get the latest features, animations, and updates to your Floower. It’s really easy.
Treat Your Floower so it Lasts Forever
- Není vhodná pro děti do 3 let.
- Nevystavuj ji přímému slunečnímu svitu a UV záření.
- Chraň ji před teplotami nad 50°C a chladem pod 5°C.
- Nezalévej ji.
- Nesnaž se ji zasadit.
- Nejez ji.
- Ponechej ji uvnitř.
- Nevkládej prsty do květu.
- Nerozebírej ji.
- Ponechej ji v klidu stát, pokud jsou lístky zrovna v pohybu.
- Udržuj ji nabitou. Pokud ji nebudeš delší dobu používat, vypni ji pomocí vypínače na spodní straně.
- Nerozebírej spodní kryt podstavce.
Bottom LED indication
A small status LED located on the bottom of your Floower indicates what is going on.
- Blue flashing – Bluetooth is turned on
- Purple flashing – WiFi is turned on
- Red flashing – Floower is charging